Share this content on Facebook!
26 Nov 2013
Failure Analysis: If there is leakage or injector clogging klom electric pick gun, it can not be carried out in accordance with the instruction fuel injection ECU, resulting mixture is too thick or too thin, so that individual cylinder working poor, causing the engine idling instability. Mixed gas injector blockage caused by too lean, the oxygen sensor will produce a low level signal, the computer will send enriched mixture of instruction based on this signal, if the instruction beyond the regulatory limit, the computer will mistakenly believe that faulty oxygen sensor and memory fault code. 

Diagnosis: injector with a stethoscope to check x-100 key programmer whether to issue a "khaki khaki" for moving sound or measuring injector fuel injection quantity, if the injector actuation without sound or exceeded the standard fuel injection quantity, fuel injector that is failure. 

Troubleshooting: cleaning fuel injectors, check each injector fuel injection quantity and confirmed no blockage, leakage phenomenon. As an owner, these cars are necessary to understand the failure of common sense.


Comments

There isn't any comment in this page yet!

Do you want to be the first commenter?


New Comment

Full Name:
E-Mail Address:
Your website (if exists):
Your Comment:
Security code: